Ethernet POE powered switch 5 port

1. 10/100M 48v Eternet POE switch 2. 4 port switch Compliant with IEEE802.3af, IEEE802.3at standard, 3.Each port 25w

NETCOM POE SWITCH

NETCOM POE which is designed specifically for Telecom carrier by Guangzhou Wanglu Communication Co., Ltd. The device implemented advanced MCU control technology. Total power, individual port power, port status and device temperature are displayed on LCD real time. And it has efficient protection of each port. It is used with wireless AP, IP cameras, VOIP and other device that needs network and power supply.

NETCOM POE SWITCH Features

1. LCD display and control panel, display the total power, power of each port, the device temperature, etc. ( only for 8 port POE)

2. The entire device or any single port reset ( only for 8 port POE)

3. The POE and UPLINK port support automatic MDI/MDI-X function

4. Supply 4 or 8 POE power port, one UPLINK port

5. 10/100Mbps, full/half duplex automatic adapt

6. Compliant with IEEE802.3af, IEEE802.3at standard, 25W Max per port

7. Backplane switching capacity of 1.0Gbps

8. 2K MAC address list

9. Extend the cable transmit distance, furthest to 300m. ( only for 4 port POE)

9. Effective short circuit, overload and total power protection

10. Each port with indicator light, alarm light, device alarm light

11. Metal case, with wall mounting hole

NETCOM POE SWITCH Technical features and Specifications

Technology Specifications

IEEE standard	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet
switching structure	Back-plane( switch ):1.0Gbps Transfer Rate: 14,880pps for Ethernet port 148,800pps for Fast Ethernet port
Transmit rate	Ethernet :10Mbps half duplex,20Mbps full duplex Fast Ethernet:100Mbps half duplex,200Mbps full duplex
Mac address	2K MAC address list
interface	10/100TX: RJ-45,all ports support automatic MDI/MDI-Xfunction 4 port POE or 8 port POE
Port protection	Effective short circut ,overload and total power protection
Cable type and distance	10BASE-T: CAT 3,4,5 UTP (maximum length 100m ) EIA/TIA-568 100 OHM STP(maximum length 100m) 100BASE-TX: CAT 5E UTP(maximum length 100m) EIA/TIA-568 100 OHM STP (maximum length 100m)
Cable extend distance	200m (only for POE04 switch )
POE PINs	Support A B mode Positive (VCC+):RJ-45 pin 1,2,4,5 Negative (VCC-):RJ-45 pin 3,6,7,8 Data (1,2,3,6)
Protocols	CSMA/CD
Power supply	External Power Adaptor (POE04) (100V-240V AC 50Hz-60Hz, DC48V/ 2.5A) Internal power adaptor (POE08) (200V-240V AC 2A 50Hz-60Hz)
Overcurrent protection	Implemented
Storage temperature	-20°C-+70°C
Operating temperature	-10°C ~+ 50°C 5%~95% Non-condensing

Dimensions and weight

	NETCOM POE01	NETCOM POE04	NETCOM POE08
Width	58mm	155.6mm	270mm
Height	38mm	26mm	44mm
Depth	120mm	71.4mm	170mm
Weight	<0.3kg	<0.5kg	<3kg

NETCOM POE series protect function

Range of output over-voltage protection: 52VDC

Over current protection (single channel): 750mA

Over voltage protection: Input voltage is over 260VAC

Over voltage recovery point: Input voltage is below 255VAC

Low voltage protection: 90VAC(POE04) / 140VAC(POE08)

Voltage recovery point: 95VAC (POE04) /165VAC (POE08)

Over-temperature protection:100°C

Ethernet POE powered switch 5 port